Rot under foot pump

The rot area under the foot pump (foot pump is out until the rot project is complete) is going to come out. The wood is too far gone to just use Get.Rot on it.

To get out the rotted plywood we need to remove the lower part of the front foot pump teak enclosure.

This is all enclosed in teak and will need to come out. We are trying to remove as little as possible. Some has to come out so we can cut the rotted plywood out and replace it. Then remount the foot pump and then re-install the front of the cabinet.

This is getting stalled because of the re-power.

We did get the teak screw plugs drilled out so we can put some screws in and back out the teak plugs. There are plugs on the four corners of this piece of teak with the upside down U in it.