Ordered the wiring for T fuse block in head and Cpap - 2011

For the Blue Sea Systems ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover in the head to the house battery bank.

# 4 awg 26 feet with 3/8 to #10 black
# 4 awg 26 feet 3/8 to 5/16 red
# 4 awg 1 foot of red 5/16 to #10 - from 80 amp fuse to "T" fuse block
Also:
50'  3/10 with #10 terminals on one end.

September 2011 - At Marina Cortez Harbor Island, San Diego, CA

Moved ResMed CPAP machine to over bead in cabinet

 This is for my Cpap breathing machine in the state room to the ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover in the head.
When on the hook the CPAP machine will run off the house batteries.
 Also the remainder of the #10 wire will wire up the electric pump we use for the Kayak and our future dingy.  We will have the plug in the cockpit and have the pump up on the fore deck or on the dock if there is a dock available. The pump will plug into the outlet in the cockpit that is wired to the house batteries with this #10 wire.

Ordered from:
shop.genuinedealz.com/