The March madness is not so mad because we are expecting a
winter storm from the folks up in the Pacific North West and then we are going
a cruise. A cruse on a ship not a boat. So that effectively takes care of March
as projects are concerned. Looks like it will be April foolishness!
The breaker on the left without a label is or was the mast
head strobe light toggle. Now we went through that mast head light when we had
the mast off. It was re-wired and an LED anchor light bulb installed and we
tried a LED tri color light but evidently purchased the wrong one. We replaced
the incandescent and have purchased a new LED for another try. Any way there
was not a strobe light in the mast head light. Why there is a toggle to one and
wiring going to the terminal block by the mast is a mystery. We decide not to
purchase a new mast head light as the benefits were not there for the cost. If
we did we may have chosen a strobe with it, might not. We may at some time add
one, never say never so we left the wiring but removed the breaker.
If you have read the previous posts I burnt the last breaker up :(
Now we will move the
120 volt water heater breaker down to that spot. This will give us enough room
to add a dual pole breaker after removing the top three 120 volt single pole
breakers. This will get us into the 21 century and the give the Xantrax charger\inverter
what it wants. The new dual pole breaker also has podiatry lights which we do
not currently have (another great pun).
No comments:
Post a Comment