What i got from that is below.
February 2012 - Currently At Marina Cortez Harbor Island, San Diego, CA
Q: What maintenance should be done to maintain performance?
A: The burner orifices should be cleaned once a year to remove carbon deposits and grease
The answer here is take off the burner tops and use a 7 mm socket to remove the brass fitting. Do not poke it with any metal objects as it will then be scared and produce uneven heat. Use a tooth pick or something if need be. Use rubbing alcohol to soak the fitting in and then a tooth brush to clean it.
Q: How should I clean the Stainless Steel on my Range?
A: Do not use abrasive pads; they will scratch the surface. Use the mildest cleaning procedure that will do an effective job. Always rinse thoroughly with clear water and dry completely. Frequent cleaning will prolong the service life of stainless steel equipment and help maintain the finish. Ordinary deposits of waste and fluids can usually be removed with soap and water. More stubborn deposits or stuck on debris may require harder rubbing or the use of commercial cleaning products acceptable for use on metal surfaces. When using any cleansing agent, the rubbing should be in the direction of the polish lines or "grain" of the metal.
So this seems that Easy Off on the grill part will be fine.
No comments:
Post a Comment