The Propane box will need to fit in the lazarette.
The bottles will need to be removed for filling so the the placement of the propane box is an issue.
October 2010 - Currently At Marina Cortez Harbor Island, San Diego, CA
The bottom is braced and it has bracing "7” from each side.
The bottom is braced and it has bracing "7” from each side.
The “L” brackets will screw on the stern side of the refer inside of the lazaret (into plywood) for mounting the propane box. The propane box will be removable in case there is a need to get into the lazarett and do some major work of any kind.
The refer compressor will also be there in the lazarett and on top to the port side to the propane box so that has to taken into consideration. The keel cooler for the refer can only be five feet from the compressor so that is another consideration. It will need a through hole. The propane locker will also need a through hole for venting. Come to think about it so will the AC but in a different location and dam so will the water maker and the salt water wash down pump, the boat will be full of holes!😜
No comments:
Post a Comment