Foot switches + light

 Got the UP foot pedal all drilled and ready for final insulation for the rope gypsy and the DOWN foot switch for the chain gypsy all drilled and ready to be screwed in (installed).


I just need to buy some marine silicone to put under them to keep water out.


Got the rope Houser pipe ready with the spot set for installation.


Need to buy some screws and a 3 ½ inch hole saw.


Also go the last of the two lights installed. It is behind the chain gypsy. These lights have 4 red and 4 white LEDs. Can be turned on red or white light.


All of it still needs to be wired up.


Picked up a fuse holder for that.

UP foot pedal for the rope gypsy

                                                          DOWN foot switch for chain side

Did some gel coat on the old holes - drilled new holes and it is ready to be screwed in

If it were in use -  I am stepping on foot switch.

Added LED light for chain gypsy, these lights have 4 red and 4 white LEDs. Can be turned on red or white light.

Fuse holder