New Jabsco Hydro Air bilge pump sensor installed.- 2024

 We have gotten our new Jabsco Hydro Air bilge pump sensor installed. This sensor was recommended by Curt and Jill on s/v Namahana. It works on air pressure. When one inch of water gets in the bilge the Whale Gulper will go off. It is our everyday bilge pump. February 2024 - ⛵ Chip & Debbie 💑 Currently in Marina Costa Baja in La Paz, Mexico
Follow us on Facebook!

 

 If there ever gets to be about a foot of water in the bilge, then the Rule 2000 bilge pump goes off also. If about a foot and a half of water gets in the bilge then our bilge alarm goes off and it is a real loud siren. Then we would turn on the Jabsco bilge pump and it would run along with the other two. All go to their own thru hulls. If they cannot handle it and I run out of arm on the cockpit hand-pump bilge pump, we will jump in the dinghy!

The sensor that came with the Whale Gulper broke and we replaced it. That one also broke so we went with the air pressure one. We do have a deep bilge which we like.