We were able to get a little refer work done. Debbie at work.
This is the cockpit lazarette refer access point
May 2011 - Chip & Debbie 💑 Currently in Marina Cortez ⛵ in San Diego, SoCal
Debbie glued in the pieces of foam that we had cut for the refer. That makes the refer complete as far as foaming and gluing is concerned.
Debbie then moved to the freezer where she glued in the piece of foam for the old spill over.
Then and another piece for the bottom. We then will inject some spray foam under that piece to fill the voids. The glues needs to setup first.
I cut some piece for the indentations in the fiberglass freezer shell. We would like to make that smother and then add a two inch piece of foam over the indentations so it is all smooth, no more indentations in the liner or foam. It is a little time consuming shaving the foam to about 3/8 of an inch to fit there. But that will make it easier to fiberglass.
We think something like this from Home Depot will seal the lids once we get the box fiber glassed and painted.
No comments:
Post a Comment