Beta 38 hp engine zinc leaks - found out why, NPT or BSP - 2018

Ok we may have found out why the Beta engine zinc leaks. It is because at one time or another I did buy other zincs, from Jorge (SYS) in Paradise Village Marina and in the US. These seem not to have the BSP thread but the NPT thread.


July 2018- s\v Elegant'sea is Currently in Paradise Village Marina in Banderas Bay Mexico
July 2018- We are now Currently in Ajijic which is a town by Lake Chapala ,Mexico house sitting.

Lewmar H3 anchor windless wires and butt connectors and spares pins - 2018

June 2018- s/v Elegant'sea is currently in Paradise Village Marina in Puerto Vallarta, Banderas Bay Mexico
July 2018- We are currently in Ajijic which is a town by Lake Chapala Mexico

 
JC at West Marine in Point Loma (San Diego) just happened to have a Lewmar H3 Anchor Windless (like the one we have) on the shelf so I could see what size the wires are coming out of the bottom of the unit.

El Cid Marina, nice sunset wedding, lots of nice lights and music - 2017

This took place on - 12\17\2017- Tied up in the El Cid Marina Mazatlán, Mexico

El Cid Marina has these events all the time. Usuay on the weekend.

We have farmed out our cap rail varnish and caulking in Marina Vallarta - 2018

 This  happened in March/April 2018 - in Marina Vallarta, Banderas Bay Mexico (Puerto Vallarta Jalisco)
 Yes we have "hired out" to fix up our teak cap rail. It needs some lovin' and we decided it was time to start farming out some of these projects. They are just going to repair the Sikkens Cetol where it has bubbled. They will sand the whole cap rail and repair the bubbled-up areas and then put on a new coat of varnish over the whole cap rail. It may take a few coats where the Sikkens Cetol has come off or has been sanded off to feather it in.

Opps, wrecked our old car cover so we purchased a new one - 2018

July 2018- s\v Elegant'sea is Currently in Paradise Village Marina in Banderas Bay Mexico
July 2018- We are now Currently in Ajijic which is a town by Lake Chapala ,Mexico house sitting.

This post was never posted because I was waiting to take pictures of the cover on the car. We decide to just post it because a lot of time has passed and still no pictures. As you can see below this was written when we were in San Diego CA.

More sewing on companionway screen - 2015

End of September 2015 - At private slip in Nuevo Vallarta in Banderas Bay, MexicoThis was never posted so now it is. 


 
This companionway screen is getting close to being finished. We have been using it anyway at times and it has been a great help keeping the mosquitos out and one time a swarm of bees!

Replacing alternator(s) belts on Beta 38 hp diesel engine - 2018

Replacing alternator(s) belts on Beta Marine 38 hp diesel engine.
Beta 38 hp with two alternator belts. Want to replace them but one will not come off. Solution is to buy replacement 1\2 or larger than the one we are having problems with. 


June 2018- s\v Elegant'sea is Currently in Paradise Village Marina in Banderas Bay Mexico
July 2018- We are now Currently in Ajijic which is a town by Lake Chapala Mexico house sitting.

Beta stack tube O-rings are not sealing - Heat Exchanger removed- 2 - 2018

This is the affected area of the heat exchanger that is preventing 
the stack tube O-rings from sealing. It seems to be scored up too much. 

Added two bronze valves for the Beta engine coolant to the water heater - 2018

This has been a long time coming but finally we added a couple bronze valves to the Beta cooling system antifreeze that runs up through the water heater and the accumulator tank and back to the heat exchanger.