Solar panel got wires and cam cleat

The solar panel got wires attached to them and then run down to where the deck cam cleat is getting installed.

We drilled a hole for the cam cleat through the back of the boat. Then marked off the holes for the screws and drilled them. We seated the holding plate for the cam cleat but we are not satisfied with it. We will re-seat this with 3M 4000 UV to be sure.

It was really raing all day so that is all the progress we could make.

We labled all the wires. That way at the junction box we will know which wire goes to which buss and to wich solar panel. We may need to cut some wires shorter at the junction box and re-label but that's the way it goes.

P + for port positive etc.

P -

C +

C -

S +

S - 

 We cut the larges hole the cam cleat would take because we have these wires plus the spot light and room for another one or two, expansion as you know that is how it goes J