We got the shelf for the refer trimmed up so it may fit. It
needs to get through the front lid and then be as wide or not quite as wide as
the refer. We have a couple aluminum slides we will use for the shelf to slide
on. One end needs to jut out a ¼ inch to track the slide. It is kind of hard to
explain but you will see when it is done.
The Plexiglas cuts
easy enough with a jig saw and a metal blade. I think it is (Debbie said) 32 teeth?
Debbie picked up some blades at HD.
The Plexiglas melts
as you cut it sealing up the cut so it is a pain to get it cut. The long
stretches we used a jig saw and for the shorter cuts a hack saw with the blade
reversed so it cuts back. It cuts cleaner than the jig saw.
The shelf needs some
sanding up but first lets see if it even fits.
We cut a corner off for wiring to pass through.
We cut a corner off for wiring to pass through.
No comments:
Post a Comment