This is a boat like ours. This person has tore out the old box and created a new one. We would not want to do this. It does show that he used Home Depot foam.
This is how we will probably mount our compressor in the lazzerett.
"This pic shows the old fiberglass box lined with layers of closed cell, foil covered foam sheets (Home Depot). There are 7 inches on the bottom and 4 inches on each side, with spray- in foam in the irregular cavity on port side. The ply panel on far right is to provide a suitable mounting surface for evaporator screws. Next step was to cut a 3/4” ply cover for box, fitting it flush with the original box lip."
No comments:
Post a Comment