Electrical dingy pump receptacle in place - 2011

 
 Had a little free time so we cleaned up the hole that was for I don’t remember what as we removed it a long time ago. We have had used it for stringing wires into the boat.
December 2011 - Currently at Marina Cortez Harbor Island, San Diego, CA

For example, we used it for the Dish cable and the power cable to the string of lights in the cockpit and then for the Cable TV etc. We removed that stuff and putt he wires for the new receptacle in the hole.
Oops the wrong end. Those connectors should go to the battery buss.
 We then widened the hole with a rasp and cleaned up around it.

 We put in the new receptacle in and Wala it looks nice. Far from done but that hole has been there for years. Made so progress on this job also!
 This will be the plug for the dingy\kayak electric pump. It will work all the way up on the fore deck or out on a dock if there is one. That is where we would blow up our Achilles LSI-310E

 dingy or kayak.

1 comment:

  1. This comment has been removed by a blog administrator.

    ReplyDelete