We got the modem hole drilled for the modem cables and
snaked them down into the SSB radio area.
Just time consuming so
as to not hit other things while drilling etc.
First we removed the radios from the nav station by removing the plywood . The removed the Pactor modem.
Needed a hole here to snake the Pactor modem cables to the SSB radio unit that is under the nav station.
After a pilot hole and Debbie crawling into the back of the nav station to locate the spot and give it her OK we drilled the hole. The drill bit is to locate the hole so she can pass up one cable.
We re-installed the Pactor modem and radios and were done. We lefty it all temporary until we confirm an email goes out when the installation is done.
No comments:
Post a Comment