Anchored in Barra-Bahia de Navidad - Sailing to Santiago by Manzanillo? Weather! 2013

Middle of February 2013 – Anchored in Barra-Bahia de Navidad lagoon
As we are anchored in the lagoon with our Islander Freeport 36' sail boat s\v Elegant'sea.
In these pictures it is a great day, currently though it is blowing an easy 25 knots through here. White caps and oh well the 45 Bruce is holding us as it likes to - nice and firm! It is sunny and other wise a beautiful day. Some white caps and chop but no swell or current to speak of. 

Divers installed two through hulls for HVAC and anchor wash down pump- 2012

 
 Before we left on the Baja HA-HA on 10-29-12 in San Diego we had divers come by and put in two under water through hulls (TH) with valves and add a scoop to a third, the water maker one. The divers did a nice job. We got two 3/4 “ through hulls installed. One for the 12000 btu Mermaid HVAC unit and one for the wash down pump.

Anchored in Melaque, video and shrimp boats in Chamela Bay video.- 2013

Beginning of January 2013 - When we were in Chamela Bay (Perula Bay)



Here is a video of Melaque. After a week or so we up anchored bow and stern and went to the Barra-Bahia de Navidad lagoon a dropped anchor. 

Beta 250 hour maintenance, not that easy - 2013

Middle of February 2013 – Anchored in Bahia de Navidad lagoon, Mexico
We started our 250 hours maintenance of our Beta Marine 38 hp motor. We are in the Barra lagoon at anchor. We probably have about 325 hours on the motor now.

SEALAND. SaniGard™ Holding Tank Vent Filter re-built and working, fine! - 2011


The white tape is for measuring cuts.
 Ok we rebuilt our old poop filter. Yep we did a re-build of our SEALAND. SaniGard™ Holding Tank Vent Filter. 5/8 hose size #309310002 holding tank vent filter.  We purchased the kit from eBay quite a while ago. "SaniGard SeaLand Dometic Vent Filter RECHARGE KIT for marine holding tanks"

Gold Coast Cruisers’ Net VHF Controllers Guidelines - 2013

February 2013 – Bahia de Navidad - Marina Puerto de la Navidad(Barra Marina) Mexico.
My first time AT Net Controller.

Anchored in Chamela Bay(Perula), The town of Chamela(Perula()

January 2013 - Anchored in Chamela (Perula Bay), Mexico


Anchored in Chamela (Perula Bay), It rained for three days and three nights - 2013

Beginning of January 2013 - Anchored in Chamela (Perula Bay)
After this video the swells kept building and the rain intensified.
It rained for three days and three nights and on the third day it rained hard, and I am talking really coming down for a good eight hours straight. The storm came out of the South and the anchorage in Chamela Bay has no protection from a south swell, wind etc. We got big rolley swells and some high winds but it was the swells that were concerning at times. They at one point were getting so big I thought the waves might start breaking as they came through the anchorage, they did not.

Enjoying the pool at Barra Marina, Grand Isla Navidad Resort - 2013

Beginning of February 2013 – Barra Bahia de Navidad - Barra Marina

Ok we are at the Grand Isla Navidad Resort and Marina Puterto da la Navidad.
Not anything to dislike at this five star resort!
There is a Super Bowl Party tomorrow and should be a good social event for us.
Now we think the pool is not as fun as El Cid Marina's but it is a close second.


More Shade Tree work, zippers from Hogan from "Hogan Sails" - 2013

Rachel and Hogan from "Hogan Sails" in the back ground with Debbie to the right..

2 stroke verses 4 stoke outboard? We went for 4 stroke - 2013

Beginning of February 2013 – Barra - Bahia de Navidad - Marina Puerto de la Navidad(Barra Marina)
 When we were in San Diego, CA say six months before we left on the Baja Ha Ha 2012 which was less than a year ago people on the docks would be saying that two strokes were king in Mexico. That we should even go to Arizona and purchase a two stroke because they still sold them there and you could get a good one at a fresh water lake etc. That in Mexico no one knew how to work on four strokes and there were no parts.

Tried again with the wash down pump


Late January 2013 – Barra lagoon

 We tried again with the wash down pump. This time we got it moved but it would not prime. It says no more than 6’ from the source and so I guess they meant it. It was about a foot or so more. 


After returning the pump to its former location and having to mess with the pump to get it to prime I think I found the reason. It had an air lock and after removing the out hose and letting the pump work a bit to shoot out some sea water it worked fine. 

Debbie doing wiring to new terminal block.

Now to move it again. Only this time we will just make the hose longer at first to see if it will still work. We had to modify some plumbing and wiring last time to move the pump. At least now it is in the right orientation.

The usual, empty some things from the hanging locker and dig out some tools.

New SS Honda 9.9 hp outboard motor lock - 2013

 We had bought a new stainless steel outboard motor lock for our Honda 9.9 hp outboard in Puerto Vallarta and I was trying to figure out how to get it on the motor. This pelican seemed to want to give me some advice. Or most likely wanted some fish I might have had but did not.