Chip & Debbie Willis on s\v Elegant'sea

Shower head and rail system

We added our shower head and rail system this weekend. From Kohler.
Debbie got it all from
faucet-warehouse.com

Moved original wet cell batteries to under sattee from stateroom - 2010

April 2010 - Marina Cortez San Diego, CA

To put the batteries under the settee we need to find a way to connect them to the charger\inverter.

3\31\2010 San Diego, CA
Got our new bimini installed. Am not sure about the stretch of the fabric. We got a Weblon vinyl fabric with white on top side and sand on under side. It looks as if it may collect water.

We will hose test it this weekend. There is a Catalina 34’ boat in out next slip with a vinyl bimini. We will water test theirs also for them to see if there is a difference J. It takes a bit of getting us too. We got a 10x20 window also.

Moved the battery charger from stateroom to lazarett - 2010

March 2010 - Marina Cortez in Harbor Island , San Diego

Above new location by new charge behind nav station.

Moved the original battery charger from stateroom hanging locker to lazarett - 2010

March 2010 Marina Cortez in San Diego Harbor Island

Above new location by new charge behind nav station. Looking down.

This weekend we moved the battery charger (original one) from the hanging locker where it was to the new location the starboard lazarett.

Got our bimini frame installed

3\29\2010 San Diego, CA

This weekend we got our bimini frame installed (well Monday). The handsome guy with the hat on is me. The other guy (not as handsome as me) is Todd from San Diego Canvas. We are shooting the fat over the wind generator pole and outboard motor lift scenario. Neat day or so should see the bimini on!

Got our new H3 Lewmar windlass working - 2010

March 2010 - At Marina Cortez Harbor Island, San Diego, CA

Old windless out!

Old charger to new Xantrex Freedom 2000 charger\inverter - 2010

March 2010 - At Marina Cortez San Diego, CA

Because we will be living on our boat for a long time to come we decide on a Xantrex 2000 watt charger\inverter. We may never need all that but we may grow into it.
We may sail to Costa Rica and then eventually up to San Francisco. Or farther south etc.

So we have purchased a Xantrex Freedom modified sin wave charger\inverter.
Because of space considerations we chose a unite that had both instead of separate unites.

Salon courtesy lights

4/19/10
I added a new curtsey light in the salon, well replaced an old one with the new LED red ones we had purchased. There are places for seven. We have six in place, five working (ran out of but connectors). We are getting there. I used a hole saw to make a bigger hole for one under the steps in the companion way. Used a hole saw in a hole saw, worked good.

Dodger frame built, ready for covering

2\15\2010 San Diego, CA

We had our dodger frame built.

We were going to do this and the bimini project ourselves but decide we had just too much to do to take it on. We are having San Diego Canvas do it.
We had a full back hand rail made and two side and rails.

Bow roller replacement, new CQR and Bruce rollers - 2010

January 2011 - At Marina Cortez, San Diego, CA

We want to replace these bow rollers with two new ones so that we can have both anchors on the bow.

We have added a Caframo Bora 3 speed an in the head and have removed the old light that was by the door as you come in. The reason we got started on this is because the previous owner (PO) stored the spinnaker pole in the boat.

We have added two sconce Led lights in the head and have removed the old light that was by the door as you come in. The reason we got started on this is because the previous owner (PO) stored the spinnaker pole in the boat. To do this he cut holes in the head bulkhead and the settee bulkhead. So we used a piece of starboard to cover the hole in the head and put a fan there. The we added these two lights. They are real nice looking and make the head look even bigger. These are LED lights and have two bulbs each.

May 2010 - Tied up in Marina Cortez, CA.

The top round white spot is where the spinnaker pole went through. We covered the head side with a piece of white starboard.

Behind head door.

Boat hook

Because we are in a 35’ slip that is just about wide enough (we use ac couple flat fenders) we decide a boat hook was need to pole out. You can see it mounted on the stanchions. Got to look through the power cord etc. It is a Shroud and we have a bunch of attachments for it. We also have another Shroud pole we use for a broom.

Galvanic Isolator

Our insurance company required that we install a Galvanic Isolator as part of our survey.
So rater than argue about it we complied.
Also the Xantrex Freedome 2000 inverter\charger wanted one installed as part of their grounding requirements.
We installed it in the starbord lazerett.

Head LED red\white light

We replaced the florescent light in the vanity in the head with a LED light. It will do both bright white and red. With the curtsey lights on in the boat this light when switched to red allows you to walk through the boat say at watch at night and go to the head without losing your night vision.

New dorade (cowl) vent paint

New dorade (cowl) vent paint
An easy and quick project with a big bang. It was simply a matter of washing them real good and removing old paint. I think we used acetone. We then bought some red Rust-Oleum paint from Home Depot and put a couple coats on. They have held up pretty well so far. It’

s been at least six months.

The Bomar-Pompanettellc Hatch project, removing, rebuilding and replacing - 2009

Go around side ways as it will cut through the sealant.

Varnishing the vanity in the head or first varnishing project! - 2009

2009 - Marina Cortez San Diego, CA

We started varnishing the vanity in the head. This is our first varniching project!

Yes the who would know it binnacle project. Caught by complete surprise as we were motoring out in the bay the engine controls started acting up.