We have added a Caframo Bora 3 speed an in the head and have removed the old light that was by the door as you come in. The reason we got started on this is because the previous owner (PO) stored the spinnaker pole in the boat. January 2010 - Currently At Marina Cortez Harbor Island, San Diego, CA
To do this he cut holes in the head bulkhead and the settee bulkhead. So we used a piece of starboard to cover the hole in the head and put a fan there. By doing this it covered the hole on the head side. It is three speed and you press the center for control. Works great and will be nice in the tropics. We will be adding a few more in the boat.
In the photo the white starboard looks whiter than the rest of the bulkhead but in reality it is much closer to being the same color white. Also we have since wired it up and you do not see the wires.
The fan is completely adjustable, from three speeds to up down and around. In fact it will turn all the way around and push air into the bed are if need be.
The top round white spot is where the spinnaker pole went through. We covered the head side with a piece of white starboard and mounted the Caframo Bora fan on it.
In the photo the white starboard looks whiter than the rest of the bulkhead but in reality it is much closer to being the same color white. Also we have since wired it up and you do not see the wires.
The fan is completely adjustable, from three speeds to up down and around. In fact it will turn all the way around and push air into the bed are if need be.
The top round white spot is where the spinnaker pole went through. We covered the head side with a piece of white starboard and mounted the Caframo Bora fan on it.
No comments:
Post a Comment