House sitting gig is over at Nuevo Vallarta, paddle boarding kennel - 2015

End of November 2015 - At private slip in Nuevo Vallarta in Banderas Bay, Mexico
OK we have left the house and the dock!

Sailing South from La Cruz direct to Tenacatita - 2015

End of December 2015 - Anchored in Barra-Barra-Bahia de Navidad lagoon, Mexico

 We left LaCruz anchorage about 2 pm and sailed the afternoon thermal one tack for over three hours before the wind died. Then we motor sailed. The seas were a bit lumpy until we got to the light house about 3-5 km out. The seas picked up and were a bit gnarly at about 8-9 pm. We motor sailed with the main reefed and were surfing the waves at about 7 knots and the Garmin GHC 10 class A under deck autopilot was working hard. This was our first test of the Garmin autopilot repair we did this last summer. The Garmin GHC 10 class A under deck autopilot worked great! The wind picked up to over 20 knots and stayed that way past midnight. We were tired so we left the head sail furled and surfed the waves motor sailing. In the am then after we passed Ipala the waves laid down a bit and the wind died. The wind never picked up again all day for any sailing.

Anchored in La Cruz - Trailer Park Boys, m/v Aussie Made came by - 2015

Middle of December 2015 -Anchored in  La Cruz anchorage in Banderas Bay , Mexico


Hugh and Barb on m/v Aussie Made came by on their Grand 
Banks 42' trawler and snapped a picture of us and we like-wise.

Anchored In La Cruz anchorage - Magma Flopper stopper repair, zincs - 2015

Beginning of  December 2015 - La Cruz anchorage in Banderas Bay, Mexico

So here we are sitting in LaCruz anchorage now for about 10 days or so since December first, 2015. We have been doing the usual things and getting the boat ready for our trip south and around Cape Corrientes. We hauled anchor and finished running our Garmin auto pilot wizards (GHC10 class A under deck auto pilott) and successfully I might add! We are getting ready to do another sail after fixing our reef lines the person who re-installed the main for us at the end of the summer messed up. Some other small things also and were hoping the weather cools off more down south. It finally broke here but late this year. Started getting hot early and stayed late!

Debbie put in switches for our two broken Bora 3-speed marine fans - 2015

End of November 2015 - At private slip in Nuevo Vallarta in Banderas Bay, Mexico
More summer fun with electrical 😀


Note:
2018 - these thumb switches have worked out less than we would have liked. They are flimsy and are hard to switch. We did not leave enough chord to reach them easily. 
We have purchased some of these we will try out, they seem easier to turn on\off and are more robust.

Varnished Stateroom drawers and doors - done! - 2015

Middle of November 2015 - At private slip in Nuevo Vallarta in Banderas Bay, Mexico
 
Before.

Nuevo Vallarta house sit - Debbie the chicken whisperer, hen house - 2015

End of November 2015 - At private slip in Nuevo Vallarta in Banderas Bay, Mexico


 Debbie has made friends with the hens. Some even have names 😄 They have been treating us good all summer with fresh eggs. As you see, Debbie is holding one. Her favorite is the gray colored one. It is getting close to the time to say good by. We will be moving back on board s\v Elegant'sea soon then staying at the dock till the end of the month. Then this gig is over. We will continue to summer over at ParadiseVillage Marina.

Fuel filter and TMC 60M tranny oil changed - 2015

Middle of November 2015 - At private slip in Nuevo Vallarta in Banderas Bay, Mexico

From the TMC 60M manual.

Getting ready to move back aboard s\v Elegant'sea! from house sit - 2015

Beginning of November 2015 - At private slip in Nuevo Vallarta in Banderas Bay, Mexico 
Monday we plan on starting the compounding and waxing of the port side. Weve got the starboard side done.

Beta 38 hp diesel engine fuel and air filters found in Puerto Vallarta - 2015

Middle of November 2015 - At private slip in Nuevo Vallarta in Banderas Bay, Mexico

Debbie at the counter. The chicken-wire is for palm 
leaves that help keep the sun off the bus stop.

Galley/Force 10 - replaced bronze stove bar and replaced bronze towel hooks - 2015

Beginning of November 2015 - At private slip in Nuevo Vallarta in Banderas Bay, MexicoA 
The existing brass two-hook towel holder.
late summer idea was to re-do the stove bar...from brass to stainless steel.

Pressure Cooker beef stew + ingredients - 2015

This we made in the house,
We have been eating large! This week Debbie made Lasagne and the we made beef stew in the pressure cooker. This is Mexican friendly, meaning it is all available here in Puerto Vallarta, Mexico,

Voom, voom Beta Marine 38 hp diesel engine almost ready for another season - 2015

Beginning of November 2015 - At private slip in Nuevo Vallarta in Banderas Bay, Mexico 
Looking good again and running smooth!

Achilles Dinghy oars got refurbished - 2015

 It might be hard to see but our oars are getting pitted in the aluminum and some white corrosion is all around the area. We scraped off the white stuff and sanded the area. First of course we moved the plastic or locks that go on the oars. 

Main sail up for the Winter season and ready to go - 2015

 Today was about getting the main sail up. Yesterday we removed the aft Shadetree boat awning for this main install. We had Jason of Argos Marine come over and re-install the main. We splurged and the price was right. I worked on re-installing the propane locker and got it finished off and the Force 10 stove  is operational again.

Helm seat upgrade to teak in Mezcales? - 2015

October 2015 - At a private slip in Nuevo Vallarta in Banderas Bay, Mexico

Here is the main shop area in Mezcales- his motorcycle is in the far back.