Our Ritchie Compass light went out as we posted before and we bought a new LED one.
I cut the old one off by the compass housing hole and then attached the new LED red Ritchie replacement light to those wires. Filter Dryer for FrigoBoat System (Refer/Freezer) installed and works well! - 2017
Baseball game in Mazatlán - a fun break from boat work! - 2017
Debbie and I on the Jumbo Tron! Note Debbie taking our picture.
December 2017 - Tied up in the El Cid Marina Mazatlán, Mexico
AcuRite Wireless Indoor/Outdoor Thermometer with Humidity Senso - 2017
Note:
We have decided that this is too big and the outdoor sensor uses too many batteries. We have purchased a non-battery mechanical temperature and humidity gauge.
New Samsung laptop is just what we needed - 2017
Our new Samsung NP110S1K-K01US Notebook M SSD is just what we needed!
Flopper stopper (Rock N Roll Stabilizer): new zincs, new line and bridle installed - 2017
New LED bulbs for our head sconce light - looks good and are right size - 2017
Harken 5.1 Big Boat traveler gets lubed and new lines, smaller lines - 2017
Anchoring LED bow, stern and midship lights - anchoring bow light tested - 2017
As you can see in the video, the blue LED light does work and comes on about the same time as the dock lights at the El Cid Marina where we are currently docked.
Wiring terminal block for C-Pap Machines may not work as intended - P 2 - 2017
This is not going to be as easy as I thought.
Mermaid 12000 BTU HVAC epic journey to the US and back - Part 5 Testing\Running - 2017
Mermaid 12000 BTU HVAC epic journey to the US and back - Part 4 The trip back to Mexico - 2017
In Nogales Arizona we stayed at Best WesternSonora Inn Suites
and crossed the boarder at 6:00 AM and it was still dark!
Mermaid 12000 BTU HVAC epic journey to the US and back - Part 3 re-packing, velcro. painting - 2017
Sitting at our last house sit after we picked it up from Mike
and Holly on s\v Wanuskewin.
Wiring termianl block for C-Pap Machines - Part 1 - 2017
This Blue Sea Systems terminal block is for the C-Pap machines in the stateroom.
Zincs for the Honda 9.9 outboard from Dinghy Doctor - 2017
Another item we decided in the end to get before we leave the US. We think we have some spares but cannot remember. We change them every summer when putting it away for the summer season.
We swung back by the Dinghy Doctor in San Diego and picked them up.
November 2017 - Tied up in Marina Mazatlán, Mexico
We are currently house sitting in University Heights, San Diego CA
And yet more parts checked off the US buy list for
the next cruising season on s\v
Elegant'sea!
New air filter for the Beta diesel purchased in San Diego - 2017
We decided to go ahead and purchase another air filter for the Beta diesel engine
for later use. We purchased this from O'Reilly Auto Parts in San Diego, CA
November 2017 - Tied up in Marina Mazatlán, Mexico
We are currently house sitting in University Heights, San Diego CA
And yet more parts checked off the US buy list for
the next cruising season on s\v
Elegant'sea!