SHURflo Pro Blaster wash down pump plumbing - 2012

April 2012 - Marina Kona Kai Shelter Island San Diego, CA

 We have some 10' of ½ hose from Marine Exchange and ran the hose form the through hull to the SHURflo Pro Blaster Washdown Pump 4.0 GPM. We tried to get the black and clear no-kink hose but they do not sell it in 1/2 ID size.

 We did get a piece of 3/4 from the through hull to the valve for the wash down pump install. The valve is where we are going to 1/2 inch.

 We also took the strainer we had for the SHURflo. 5.0 GPM pump we blew out and used set it up for the wash down pump. Works great as the space on this spot of the hull is limited.

 We then snaked the hose from the bilge up to the pump.

 We also picked up some SHURflo parts for the strainer and pump plumbing.

 And some SS hose clamps.